User Manual
Specifications
Control Instructions
Model
LE105
Pairing Name PISEN-LE105
Bluetooth Version
4.0
Battery Type
75mAh High-density lithium batteries
Charging Port Micro USB 5V/1A
Support Profile HFP/A2DP/NFC
Weight 13.2g / 0.47oz
Transmission Range (Hz) 2.402GHz-2.48GHz
Charging Time
About 2 hours
Running Time Up to 8 hours
Standby time
6-10 days
Operating Temperature -20˚C-60˚C
Storage Temperature -40˚C-70˚C
FCC ID 2AF56-LE105
Function Operation
Power on Press and hold the Multi-function button 1.5 seconds.
Power off Press and hold the Multi-function button 3-4 seconds.
Increase volume Press the volume up (+) button.
Decrease volume Press the volume down (-) button.
Answer a call Press the Multi-function button to answer the call.
End a call Press the function button during on-line call.
Play media Press the function button
Pause/restart media playback Press the function button
Skip to next track Long press next track (+) button.
Skip to previous track Long press previous track (-) button.
Pairing mode
Press and hold the function button to enter pairing mode after
sounding power on. (LED flashes blue and red alternately when
entering the pairing mode.)
After turn on the headset, find and connect the Bluetooth device
showing as “LE105”. If a PIN code is required, enter “0000”.
Multipoint Connection
Paired the first phone with the Bluetooth headset, then disable first
phone’s Bluetooth; paired the headset with second phone, then enable
the first phone’s Bluetooth, find out the connected Bluetooth headset
and finish 1-to-2 connection.
Pair via NFC
Touch the headset with the phone’s NFC area. (The NFC function of
the phone must be enabled and the screen be unlocked) The headset
auto boots and finishes connection. Touch again for 3 second, the
headset auto turns OFF.