User's Manual

2
6. Function button: For switching the groups.
7. 5-Pin XLR male connector: For connecting the DMX adapter or console.
8. USB Type-C port: For charging the transmitter or upgrade the firmware.
Usage
1. Long press the power button to turn on the wireless DMX transmitter after inserting it into the console, press the function
button to select one group. Then select the corresponding group on the fixture to control it wirelessly via DMX console after
activating its wireless DMX function.
2. Short press the power button, the front indicators will light up to indicate current battery levels (When the battery level is
0%-12.5%, only the "A" indicator will light up; when the battery level is 12.6%-25%, only the "A" and "B" indicators will light
up, and so on, when the battery level is 87.6%- 100%, all the eight indicators will light up), it will return to indicate the current
group after 5 seconds.
3. The side indicator will flash when the battery level of the transmitter is lower than 10% and indicator lights breathe while
charging. Once the battery is fully charged, the side indicator will stay on.
4. Firmware update: insert the USB flash drive and turn on the transmitter, the eight front indicators will light up one by one,
which means the new firmware can then be found on the transmitter. Long press the function button for 2 seconds to start
the firmware upgrade. When the upgrade is complete, the breathing light effect will stop and the transmitter will work normally.
If the upgrade fails, the eight front indicators will keep flashing (once per second). The transmitter will need to be turned off
before trying again.
5. Press the reset button to reset the transmitter, the transmitter will be off after reset.
General Fault Detection and Diagnosis
The wireless DMX transmitter stuck in operation interface. Press the reset button to reset the transmitter.
1. Check if the transmitter and the fixture are at the
asame gro up.
2. Chen if the transmitter has power supply.
The fixture can work normally, but can't be
controlled by the wireless DMX transmitter.
DiagnosisFault Detection
This manual has been compiled according to the rigorous testing of our company's products. Product designs are
subject to change without prior notice.