User's Manual

15
⑫WELDING
WELDING setting: rotate "Right knob" to select from DIM, CCT, SPD (Range: 001…100) and PAUSE (ON/OFF),
then rotate "Left knob" to adjust the value of DIM, CCT, SPD and PAUSE.
Rotate "Right knob" to select from DIM, CCT, SPD and PAUSE.
⑪EXPLOSION
EXPLOSION setting: rotate "Right knob" to select from DIM, CCT, SPD (Range: 001…100) and
DECAY (Range: 001…100), then rotate "Left knob" to select from DIM ,CCT, SPD and DECAY.
Rotate "Right knob" to select from DIM, CCT, SPD and DECAY.
Rotate "Left knob" to select from DIM ,CCT, SPD and DECAY.
EFFECT CH: 512
DIM: 100%
FX: EXPLOSION
EFFECT CH: 512
DIM: 100%
FX: EXPLOSION
EFFECT CH: 512
DIM: 100%
FX: EXPLOSION
EFFECT CH: 512
DIM: 099%
FX: EXPLOSION
EFFECT CH: 512
DIM: 000% - 100%
FX: WELDING
EFFECT CH: 512
FX: WELDING
DIM: 000% - 100%