Forza 150B USER MANUAL Guangdong NanGuang Photo&Video Systems Co.
Forza 150B LED Bi-color Spot Light Product Diagram Technical Data Rated Power: 170W Input voltage/current: DC 24V/7.
Product Details 8. Right knob 9. Lock catch 1. LCD screen 2. Left knob 10. Reflector 3. MODE button 4. DC power socket 5. USB port 11. Angle fixing knob 6. Power switch 7. DMX In/Out 12. L Shaped Bracket 13.
Detailed Description 1. LCD screen: For displaying various function, operations and data. 2. Left knob: For adjusting the DIM and scrolling through different selections. 3. MODE button: For switching between CCT mode, EFFECT mode and MENU. 4. DC power socket: DC power input socket 5. USB port: For updating the firmware. 6. Power switch: For switching on/off the fixture. 7. DMX In/Out: Connect to CB-DMX-3.5C-1/2 DMX Adapter Cable for DMX signal input and output. (Note: CB-DMX-3.5C-1/2 is sold separately). 8.
Usage 1. Installation of the Reflector ①When installing the reflector, ensure its mounting points align with the slots on the light fixture. When the mounting points and slots are aligned, push the reflector in place and rotate it in the direction shown on the light until it clicks into place. Note: This light is with FM mount, so please use accessories with FM mount. If the accessories with Bowens mount are needed, please mount after installing the Bowens mount adapter.
2. Installation of Bowens Mount Adapter ①Adjust the L bracket to the overhead position first. ②When installing the adapter, ensure its mounting ③Mount the adapter on the light stand. ④Ensure the Bowens mount accessories align with points align with the slots on the light fixture, rotate it according to the direction shown on the light until the adapter is put into place.
⑤When removing the accessory, push and hold the release button on the adapter and rotate according to the direction shown on the adapter until the accessory is free to be removed from the adapter. ⑥When removing the adapter, push and hold the lock catch on the fixture and rotate according to the direction shown on the light until the adapter is free to be removed from the light. Remote Control · Forza 150B supports 2.4G remote control, DMX/RDM control, and includes a built-in Bluetooth module as well.
MENU MENU CH: 512 CH: 512 LANGUAGE: ENG LANGUAGE: ENG Rotate "Right knob" to CH. MENU MENU CH: 512 CH: 511 LANGUAGE: ENG LANGUAGE: ENG Rotate "Left knob" to select address code. ②DMX Mode Setting MENU CH: 512 LANGUAGE: ENG MODE Press the MODE button to enter the menu.
MENU MENU CH: 512 BT: RESET LANGUAGE: ENG DMX MODE: ULTIMATE Rotate "Right knob" to DMX MODE MENU MENU BT: RESET BT: RESET DMX MODE: ULTIMATE DMX MODE: CCT 8bit Rotate "Left knob" to select the desired DMX mode. 2.
②DMX Terminator ln DMX control mode, the DMX output of the last light fixture should be connected with a DMX terminator (not included). The terminator is connected with a 120Ω(OHM) resistor across Pin 2 and Pin 3 (As shown below). This prevents interference caused by DMX signals in the transmitting process. 1 5 4 DMX Terminator Connection Connect a 120Ω(OHM) resistor 2 across Pin 2 and Pin 3 in an XLR 120Ω plug and insert into the DMX OUT socket on the last unit.
3. RDM Control ①Connect the light fixture to the console with RDM function by using a connection cable, the connection method is the same as that with a DMX/RDM console. ②Control the fixture via a console with RDM function. (For specific operation methods, please refer to the RDM console operation manual.) Note: The UID format of the fixture is as follows: 0008 XXXX XXXX Serial number 020B：Forza 150B Manufacturer: Nanguang 4. 2.4G Remote Control · Set the address of the 2.
MENU MENU CH: 512 WIRELESS PRO: V1.0 LANGUAGE: ENG FW UPDATE: UPDATE Rotate ''Right knob'' to WIRELESS PROTOCOL. MENU MENU WIRELESS PRO: V1.0 WIRELESS PRO: V2.0 FW UPDATE: UPDATE FW UPDATE: UPDATE Rotate ''Left knob'' to select V1.0 or V2.0. Operating Instructions 1. Connection between fixture and power adapter. ①First ensure that the power switch is off. Now turn on the light, the LCD screen will display all the relevant information for the fixture.
2. CCT Mode setting Press MODE button to CCT mode, rotate "Left knob" to adjust the DIM (DIM range: 000%…100%), roate "Right knob" to adjust the color temperature (CCT range: 2700K…6500K) CCT CH: 512 000% 6500K MODE Press MODE button to CCT mode. 0% .. . 100% CCT CH: 512 000% 6500K CCT CH: 512 100% 6500K Rotate "Left knob" to adjust the DIM. 2700K .. . 6500K CCT CH: 512 000% 2700K CCT CH: 512 100% 6500K Roate "Right knob" to adjust the color temperature.
Note: 1. In effect mode, DIM range is the same as the CCT MODE. 2. In effect mode, the color temperature is not synchronized with the color temperature in CCT mode, and the CCT adjustment range is the same as that in the CCT mode. 3. When the fixture function is unlocked, in any mode, press "Left knob" to turn off the light, the brightness percentage on the screen is 000% in this case. Press again to restore the light to its previous state, and press continuously to switch between on and off. 3.
①CCT LOOP CCT LOOP setting: rotate "Right knob" to select from DIM, CCT and SPD (Range: 02S…30S), then rotate "Left knob" to adjust the value of DIM, CCT and SPD. EFFECT CH: 512 EFFECT FX: CCT LOOP FX: CCT LOOP DIM: 100% DIM: 100% CH: 512 Rotate "Right knob" to select from DIM, CCT and SPD. EFFECT CH: 512 EFFECT FX: CCT LOOP FX: CCT LOOP DIM: 100% DIM: 099% CH: 512 Rotate "Left knob" to adjust the value of DIM, CCT and SPD.
EFFECT CH: 512 EFFECT CH: 512 FX: INT LOOP FX: INT LOOP DIM: 000%-100% DIM: 001%-100% Rotate "Left knob" to adjust the value of DIM, CCT and SPD. ③FLASH FLASH setting: rotate "Right knob" to select from DIM, CCT and INTERVALS (Range: 0.1S…10S), then rotate "Left knob" to adjust the value of DIM, CCT and INTERVALS. EFFECT CH: 512 EFFECT FX: FLASH FX: FLASH DIM: 100% DIM: 100% CH: 512 Rotate "Right knob" to select from DIM, CCT and INTERVALS.
④PULSE PULSE setting: rotate "Right knob" to select from DIM, CCT and PULSES/MIN (Range: 001…240), then rotate "Left knob" to adjust the value of DIM, CCT and PULSES/MIN. EFFECT CH: 512 EFFECT FX: FULSE FX: FULSE DIM: 100% DIM: 100% CH: 512 Rotate "Right knob" to select from DIM, CCT and PULSES/MIN. EFFECT CH: 512 EFFECT FX: FULSE FX: FULSE DIM: 100% DIM: 099% CH: 512 Rotate "Left knob" to adjust the value of DIM, CCT and PULSES/MIN.
EFFECT CH: 512 EFFECT FX: STORM FX: STORM DIM: 100% DIM: 099% CH: 512 Rotate "Left knob" to adjust the value of DIM, CCT and INTVL. ⑥TV TV setting: rotate "Right knob" to select from DIM, CCT and SPD (Range: 001…100), then rotate "Left knob" to adjust the value of DIM, CCT and SPD. EFFECT CH: 512 EFFECT CH: 512 FX: TV INT LOOP FX: TV INT LOOP DIM: 000%-100% DIM: 000%-100% Rotate "Right knob" to select from DIM, CCT and SPD.
⑦PAPARAZZI PAPARAZZI setting: rotate "Right knob" to select from DIM, CCT and SPD (Range: 001…100), then rotate "Left knob" to adjust the value of DIM, CCT and SPD. EFFECT CH: 512 EFFECT CH: 512 FX: PAPARAZZI FX: PAPARAZZI DIM: 100% DIM: 100% Rotate "Right knob" to select from DIM, CCT and SPD. EFFECT CH: 512 EFFECT CH: 512 FX: PAPARAZZI FX: PAPARAZZI DIM: 100% DIM: 099% Rotate "Left knob" to adjust the value of DIM, CCT and SPD.
EFFECT CH: 512 EFFECT CH: 512 FX: CANDLE/FIRE FX: CANDLE/FIRE DIM: 000%-100% DIM: 001%-100% Rotate "Left knob" to adjust the value of DIM, CCT and SPD. ⑨BAD BULB BAD BULB setting: rotate "Right knob" to select from DIM, CCT and SPD (Range: 001…100), then rotate "Left knob" to adjust the value of DIM, CCT and SPD. EFFECT CH: 512 EFFECT FX: BAD BULB FX: BAD BULB DIM: 100% DIM: 100% CH: 512 Rotate "Right knob" to select from DIM, CCT and SPD.
⑩FIREWORK RIREWORK setting: rotate "Right knob" to select from DIM ,CCT, SPD (Range: 001…100) and DECAY (Range: 001…100), then rotate "Left knob" to select from DIM ,CCT, SPD and DECAY. EFFECT CH: 512 EFFECT CH: 512 FX: FIREWORK FX: FIREWORK DIM: 100% DIM: 100% Rotate "Right knob" to select from DIM, CCT, SPD and DECAY. EFFECT CH: 512 EFFECT CH: 512 FX: FIREWORK FX: FIREWORK DIM: 100% DIM: 099% Rotate "Left knob" to select from DIM, CCT, SPD and DECAY.
EFFECT CH: 512 EFFECT CH: 512 FX: EXPLOSION FX: EXPLOSION DIM: 100% DIM: 099% Rotate "Left knob" to select from DIM, CCT, SPD and DECAY. ⑫WELDING WELDING setting: rotate "Right knob" to select from DIM, CCT, SPD (Range: 001…100) and PAUSE (ON/OFF), then rotate "Left knob" to adjust the value of DIM, CCT, SPD and PAUSE. EFFECT CH: 512 EFFECT CH: 512 FX: WELDING FX: WELDING DIM: 000%-100% DIM: 000%-100% Rotate "Right knob" to select from DIM, CCT, SPD and PAUSE.
4. MENU setting MENU CH: 512 LANGUAGE: ENG MODE Press MODE button to MENU. MENU MENU CH: 512 CH: 512 LANGUAGE: ENG LANGUAGE: ENG Press "Right knob" to select from CHANNEL, LANGUAGE, FAN, OUTPUT MODE, BLUETOOTH, WIRELESS PROTOCOL, FIRMWARE UPDATE and VERSION. ①CHANNEL For channel setting, please refer to P for detailed operations. ②LANGUAGE MENU CH: 512 LANGUAGE: ENG MODE Press MODE button to MENU.
MENU MENU CH: 512 CH: 512 LANGUAGE: ENG LANGUAGE: ENG Rotate "Right knob" to LANGUAGE. MENU 菜单 CH: 512 CH: 512 LANGUAGE: ENG 语言: 中文 Rotate "Left knob" to select Chinese or English. ③FAN MENU CH: 512 LANGUAGE: ENG MODE Press MODE button to MENU. MENU MENU CH: 512 FAN: OFF LANGUAGE: ENG UTPUT MODE: CONST Rotate "Right knob" to FAN.
MENU MENU FAN: OFF FAN: OFF UTPUT MODE: CONST UTPUT MODE: CONST Rotate "Left knob" to select ON or OFF. Note: (1)When the fan is turned on, the maximum output of the light will be 100%. (2)When the fan is turned off, the maximum output of the light will be 20%. ④OUTPUT MODE MENU CH: 512 LANGUAGE: ENG MODE Press MODE button to MENU. MENU MENU CH: 512 FAN: OFF LANGUAGE: ENG UTPUT MODE: CONST Rotate "Right knob" to OUTPUT MODE.
⑤BLUETOOTH RESET MENU CH: 512 LANGUAGE: ENG MODE Press MODE button to switch to the MENU. MENU MENU CH: 512 BT: RESET LANGUAGE: ENG DMX MODE: ULTIMATE Rotate "Right knob" to BT. MENU BT RESET BT: RESET DMX MODE: ULTIMATE BACK RESET Press "Right knob" to the interface of bluetooth reset. BT RESET BACK RESET BT RESET BACK RESET Rotate "Right knob" to select RESET.
BT RESET BACK RESET MENU CH: 512 LANGUAGE: ENG Press "Right knob" to confirm reset and it will return to the menu after bluetooth reset. ⑥DMX MODE For DMX mode setting, please refer to P8 for detailed operation. ⑦WIRELESS PROTOCOL For wireless protocol setting, please refer to P10 for detailed operation. ⑧FIRMWARE UPDATE Insert the USB flash drive with the latest firmware into the light fixture. MENU MENU CH: 512 WIRELESS PRO: V1.
FOUND FIRMWARE _V1.02.08 BACK FOUND FIRMWARE _V1.02.08 UPDATE BACK UPDATE Rotate "Right knob" to select UPDATE. FOUND FIRMWARE _V1.02.08 BACK FIRMWARE UPDATED UPDATE Press "Right knob" to start the update, it will show "FIRMWARE UPDATED" after the firmware update is completed. ⑨VERSION MENU CH: 512 LANGUAGE: ENG MODE Press MODE button to MENU. MENU MENU CH: 512 VERSION: V1.02.08 LANGUAGE: ENG Rotate "Right knob" to VERSION to check the firmware version.
5. Lock or Unlock Settings: long press the "Right knob" to lock the light status. The current light status cannot be changed by pressing the button or rotating the knobs. Long press the "Right knob" again to unlock. EFFECT CH: 512 EFFECT FX: CCT LOOP FX: CCT LOOP DIM: 100% DIM: 100% CH: 512 Long press the "Right knob" to lock the light status. EFFECT CH: 512 EFFECT FX: CCT LOOP FX: CCT LOOP DIM: 100% DIM: 100% CH: 512 Long press the "Right knob" again to unlock. 6.
Notice 1. Please remove the COB protective cap before using the light. 2. Please do not look directly at the emitter when the light is on . 3. Please do not place any object on the light emitter or allow liquid to flow inside the fixture or the emitter. 4. Please do not place the fixure near flammable substances like alcohol or gasoline. 5. Please wipe off debris or dirty by using a cloth with clean water or neutral cleanser when cleaning the light. 6.
What's in th box? Please kindly check. Forza 150B×1 AS-BA-FMM Bowens mount adapter ×1 AS-CAP-FMM COB Protective Cap ×1 RF-FMM-45 Reflector ×1 Power Adapter 24V/7.5A×1 Power Cable 4.5M ×1 DMX Reference Guide×1 User Manual×1 Forza 150B DMX REFERENCE GUIDE Guangdong NanGuang Photo&Video Systems Co., Ltd Forza 150B USER MANUAL Guangdong NanGuang Photo&Video Systems Co.
General Fault Detection and Diagnosis Fault Detection Diagnosis The light won't boot up properly 1. Please check whether the power supply, cable and outlet are properly connected and that the cable is not faulty or loose. 2. Please check whether the voltage value is within the specified parameters. 3. If the fixture is powered by batteries, please check if the batteries are into place, whether the battery voltage/current is consistent with the specified voltage/current.
Version: V1 2022-04-25 +86-754-85751187 service@nanlite.com +86-754-85300887 Zhanglin,324,Dongli Chenghai Shantou Guangdong China www.nanlite.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
