User's Manual

FUNCTION BUTTONS
M1000 POWER ON/OFF ①
Button ① is the master switch. Press Button ① to activate all buttons.
Press Button ① to shut down the output(s)When not in use.
SOS MODE& LED LIGHT ③⑤
Function available only when the Button ① activate .
Firstly,press Button one time ③ or ⑤ to turn on the LED light and get 3W;
Secondly,press button ③ or ⑤ again to make LED light brighter at 5W
Thirdly, press button ③ or ⑤ thirdly to turn on the SOS mode;
Fourly,press Button ③ or ⑤ fourly to turn on the sharp-flash,one more time again will turn
off the light.
If both LED lights have been actived, press button ③or just button ⑤ can control both LED
light at the same time. If you want to power both LED off, needs to press both buttons ③
and ⑤.
DC OUTPUT POWER ON/OFF ⑥
The DC output port will NOT function until the appropriate Button ①&⑥ are both
pressed to activate.Press Button ⑥ to shut down the output(s)When not in use.
USB OUTPUT POWER ON/OFF ②
The USB output port will NOT function until the appropriate Button ①&② are both
pressed to activate.Press Button ② to shut down the output(s) When not in use.
The USB-C output port will NOT function until the appropriate
Button ①&② are both pressed to activate.
5