制作要求 此页不印刷 成品尺寸：142x210mm 展开尺寸：284x210mm 钉装：骑马钉材质：铜版 纸
INTELLIGENTENERGY M1000 USER MANUAL RECOMMENDED TO FULLY CHARGE M1000 BEFORE USE
GENERAL SPECIFICATIONS The M1000 is a portable battery pack with the ability to supply 1000W of pure sine wave AC power via the onboard AC output. Additionally, The M1000 is able to support USB quick charging via the onboard 1 x USB-PD port and 3 x USB-A ports. Overall storage capacity is 999Wh of energy. Rated Output Power 1000W Rated capacity 999Wh Standard capacity 3.7V/270000mAh Overload protection Power 1100±80W Output waveform pure sine wave USB output QC3.
WARNINGS To ensure safe operation and service , follow these instructions. Failure to observe these warnings can result in severe injury or death. •DO NOT use M1000 in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons, even though we have built-in overload protection. •DO NOT use M1000 or AC Wall plug power adapter, if it is damaged or has been modified.
FEATUR FEATURE DETAILS 1.SOS MODE & LED light 4.DC Output 7.LCD Screen Display 10.straps hooks 12.Solar Charging Input 2.Cigarette Lighter Output 3.Anti-collusion Strip 5.1000W Rated AC Output 6. USB Output 8.Wireless Charger 9. Handle 11.Air Intake Vent with Cooling Fan 13.DC input Note: No user-serviceable parts inside. Recommended to fully charge the M1000 before use. BUTTON FEATURE 1. Power ON/OFF Button 3.SOS mode & LED light Button 5.SOS mode & LED light Button 2.
LCD FEATURES A.Battery Level Indicator D.AC Outputs Status G.USB Outputs Status J. Inputs Status B. total Outputs Status E. wireless Outputs Status H.DC Outputs Status C.LED Status F.abnormality Status I.LED Status HOW TO CHARGE HOW TO CHARG From Solar Charger 150W 6-9 hours depending on solar conditions From Car Port 12V 10A 7-9 hours when car running From Wall Charger 110V or 230V 6-7 hours DO NOT CONNECT DEVICE VIA AC OUTPUT PORT WHILE CHARGING THE M1000.
FUNCTION BUTTONS M1000 POWER ON/OFF ① Button ① is the master switch. Press Button ① to activate all buttons. Press Button ① to shut down the output(s)When not in use. SOS MODE& LED LIGHT ③⑤ Function available only when the Button ① activate .
The USB-C cable of different devices need different endorsements of corresponding protocols, if the USB-C port didn't work, try to use the AC output port. AC OUTPUT POWER ON/OFF ④ The AC output port will NOT function until the appropriate Button ①&④ are both pressed to activate. Press Button ④ to shut down the output(s)When not in use.USB-C OUTPUT(4) WIRELESS CHARGER(10) Press ON/OFF Button ① before charging. Press ON/OFF Button to shut down the output(s) When not in use.
DETAILS DISPLAYED ON LCD BATTERY LEVEL INDICATOR : The battery level is showing by percentage of battery. charge corresponding to the number of bars and percentage displayed. The segments in the battery level correspond to the current state of charge, 0-10% one segment, 11-20% two segments, 21-30% three segments, 31-40% four segments, 41-50% five segments, 51-60% six segments, and so on, all ten are lit when charge level is above 91%.
OPERATING INSTRUCTIONS CHARGING intelligentenergy M1000 Connect the provided AC Wall power adapter to Input, and allow intelligentenergy M1000 to fully charge prior to use, approx. 6-8 hours. When charging, the LCD Screen will be illuminated, and the LCD display will provide Battery level Indicator A , intelligentenergy M1000 is fully charged when the level is 100%. It is recommended to fully charge intelligentenergy M1000 every 3 months to maintain the health of the battery pack.
POWERING / CHARGING DEVICES WITH M1000 Select the type of outlet required by pressing the Output ON/OFF Button ②④⑥. The output port will NOT function until the appropriate button is pressed to activate the port. When activated, the indicator on the button will illuminate blue, indicating that the output(s) are active, and the LCD display will turn on and provide details on the charging output. The LCD Screen will automatically shut down when no outputs are activated.
CLEANING Be sure that intelligentenergy M1000 is disconnected from all input power sources and output devices. Use a clean, dry, soft-lint-free cloth to wipe down it. Remove any debris, dirt, or other blockages on both side vents. When cleaning debris from the side vents, do not allow the debris, dirt, or other blockages to enter the body of intelligentenergy M1000. DO NOT use abrasive cleaners or solvents.
TROUBLESHOOTING intelligentenergy M1000 WILL NOT CHARGE OR OPERATE connected devices: Ensure that the DC/USB/AC output ports are activated by pressing the Button(s) ②/④/⑥ for the port(s) in use. Confirm the connected device is suitable for the intelligentenergy M1000 by reviewing the output specifications provided in the GENERAL SPECIFICATIONS section. Confirm intelligentenergy M1000 is charged by reviewing the Battery Level Indicator A.
WARRANTY Limited Warranty intelligentenergy Warranty to the original consumer purchaser that the intelligentenergy will be free from defects in workmanship and material under normal consumer use during the applicable warranty period identified in the 'Warranty Period' section below, subject to the exclusions set forth below. This warranty statement sets forth intelligentenergy's total and exclusive warranty obligation.
WARNING (A) Read all the instructions before using the product. (B) To reduce the risk of injury, close supervision is necessary when the product is used near children. (C) Do not put fingers or hands into the product. (D) Use of an attachment not recommended or sold by power pack manufacturer may result in a risk of fire, electric shock, or injury to persons. (E) To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power pack.
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver.
