User's Manual

10
Lenovo Cleaner T1
Connect to the mobile client (skip the step if APP control isn’t required)
1.Download APP
Search “Lenovo Cleaner T1” in App Store (Apple: search “Lenovo
Google Play) to download and install.
2.Register
Open “Lenovo Cleaner T1”APP to register or login account.
3.Enter Network Distribution Status
Put the cleaner on the ground and press the “Charging button” and
“Partial cleaning button” for more than 3 seconds. It successfully
enters network distribution status if the orange indicator of flashes
slowly.
4.WiFi Network Configuration
Make sure that your mobile phone has been connected to
WiFi (only support 2.4GHz band. It can’t be connected to
WiFi which has no password. Please set password prior to
your connection. In addition, WiFi name and password
should exclude English double quotes).
5.Add Device
Click “Add Device” in the main interface of “Lenovo Cleaner T1”APP
or “My Device Interface”.
Android phone:
b. Select the hotspot of cleaner , then, click “the Next Step”;
a. Input WiFi name and password, then, click “the Next Step”;
c. The cleaner start to distribute network after successful
automatic connection. If it fails to automatically connect to the
hotspot of cleaner please try it again according to the prompt
message.
Apple iphone:
a. Connect to home WiFi, input WiFi name and password,
then, click “the Next Step”;
b. Switch to the WiFi setting interface of your phone to
select the corresponding hotspot of
cleaner ;
c. Return to APP and click to connect to
cleaner . Then,
the
cleaner starts to distribute network;
Use APP to control and use the
cleaner if it is connected
to WiFi successfully.
Installation