User Manual

3
Unit At A Glance
1. Cigarette power plug: Fit in the car cigarette socket to power on
the FM transmitter.
2. FM frequency selector: 4 FM frequency selectable: 88.1MHz,
88.7MHz, 106.7MHz and 107.5MHz.
3. Audio-In plug: Insert into the earphone socket on your audio
device.
4. Audio-In cable
5. USB charging socket
Transmitting Signals
Signals from your audio device will be transmitted through the cigarette adapter to your receiver.
To power the cigarette adapter:
Insert the Cigarette power plug to your in-car cigarette socket.
Connecting your audio device:
Insert the Audio-In plug into the earphone or Line Out socket on your audio device.
Selecting the channel:
There are 4 channels available: FM 88.1MHz, 88.7MHz, 106.7MHz and 107.5MHz.
Set the FM frequency selector to the proper channel position required.
Charging your device:
Your device can be charging via the USB socket on the Cigarette Adapter. The charging voltage is 5V, 1A. Use
the option USB charging cable to connect between the USB charging socket on the Cigarette Adapter and
your device.
NOTE:
• The operation distance between the signal transmitter (Cigarette Adapter) and the receiver is 5m. Move
closer to the signal transmitter when you feel the sound not clear.
• If you hear no sound check if the volume on the receiver is turned down, or set the receiver to search
the correct channel.
Specifications
Power Supply: 12Vdc
Power Consumption: 1W
15W when it is charging
FM Frequency Channels: 88.1MHz, 88.7MHz, 106.7MHz and 107.5MHz
S/N Ratio: 45dB
Operation Range: 5m in open area