User Manual

7
TV set by using the RCA to 3.5mm plug audio cable cord supplied.
Preparations
CAUTION:
The valid operation range between the headset and
transmitter is 5m in open area.
1. Get connected. Connect the transmitter to your TV set by the provided audio cable,
make sure that the color of RCA plugs are matched the color of socket.
Tips: It is convenient to place the transmitter near your TV set.
2. Fully extend the DC cord, and keep the DC cord lie vertically (up or down), as the DC
cord acts as a signal transmission antenna.
3. Take the battery packs from the packing then insert one of the battery pack into the
headset base, with the engraved symbol side facing upward.
NOTE: The battery pack carries a little power and it is adequate for searching an idle
FM frequency. However, it is better to charge the battery pack at least 8 hours before
first use. (For detailed information of charging the battery pack, please refer to
“Charging the battery pack”.)