User's Manual

7
REMOTE CONTROL UNIT
You may operate the apparatus in a distance with the remote control. Within
the effecve range, point the remote control towards the front panel of the
apparatus.
BATTERY INSTALLATION
1. Remove the baery
compartment cover.
2. Insert two “AAA” size baeries
(not included). Install the
baeries properly.
3. Close the cover.
NOTE:
If the remote control fails to work, check the following
possibilies:
-the baeries in the remote control are drained;
-there is an obstacle between the remote control unit and the apparatus;
-another appliance which generates infrared rays is being used nearby.
Baery Repla
cement
If the distance required between the remote control unit and main unit
decreases, the baeries are exhausted. In this case, please replace the baeries
with new ones.
Precauons concerning baeries
Be sure to insert baeries with correct polaries.
Rechargeable and non-re-chargeable baeries can be used. Refer to the
precauons on their labels.
When the remote control unit will not be used for a long me (more than a
month), remove the baeries from the remote control unit to prevent them
from leaking. If they leak, wipe away the liquid inside the baery
compartment and replace the dead baeries with new ones.
Do not heat or disassemble baeries and never dispose of old baeries by
throwing them in a fire.
CONNECT TO A MAINS
Plug the power cord into a standard 120V～60Hz outlet.