Opera ng Instru on Model: BT9090 A ve Speaker: Tower Speakers
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ....................................................................3 BEFORE USE .......................................................................................................5 COPYRIGHT ...........................................................................................................5 LOCATION OF CONTROLS .....................................................................................6 REMOTE CONTROL ....................................
IMPORTANT SAFETY INSTRUCTIONS - This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
13. Unplug the apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.
BEFORE USE 1. Choose unit installation location carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, cold or moisture. Keep away from sources that hum, such as transformers or motors. 2. Do not open the cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the set, contact your dealer. 3.
LOCATION OF CONTROLS 1. REMOTE SONSOR 2. FUNCTION BUTTON 3. PLAY/PAUSE BUTTON 4. VOLUME/BASS/STANDBY SWITCH 5. PHONE BRACKET and Display 6. FORWARD/TUNING + BUTTON 7. BACKWARD/TUNING - BUTTON 8. SPEAKERS 9. ANTENNA 10. AUX IN 11. USB CHARGE 12. SUBWOOFER 13. POWER CORD REMOTE CONTROL A B A B C K C J D C D E J E I H G F F F G L /STANDBY: Turn the unit on or set it to standby. MEM: In FM mode, use it to memory a sta on. adjust VOL+/VOLthe volume on le and right speakers.
REMOTE CONTROL UNIT You may operate the apparatus in a distance with the remote control. Within the effective range, point the remote control towards the front panel of the apparatus. BATTERY INSTALLATION 1. Remove the battery compartment cover. 2. Insert two “AAA” size batteries (not included). Install the batteries properly. 3. Close the cover.
The ring of the VOLUME/BASS/STANDBY switch goes blue. BASIC OPERATION 1. Press down the VOLUME/BASS/STANDBY switch briefly to turn the unit ON. 2. Press the FUNCTION button repeatedly to select a desired mode. 3. Rotate the 4. Press down the VOLUME/BASS/STANDBY switch to VOLUME/BASS/STANDBY switch adjust the volume. briefly then goes to subwoofer adjustment mode. Rotate the VOLUME/BASS/STANDBY switch to set the subwoofer volume. Now the unit is ready to use.
releasing the bu on when the frequency displayed star ng to change. To search a sta on manually Press /TUN- or /TUN+ bu on briefly un l you get the desired sta on. Alterna ve: Use or bu on on the remote control by pressing the bu on briefly. 3. Unwind the wire antenna and extend it to full length, orient its you find the sta on is clear enough. 4. If the signal is strong enough, the unit will turn to stereo broadcas ) appeared on the display.
1. Plug one end of the AUX IN cable (included) into the color coded AUX IN sockets at rear of the unit. Always make sure the white plug is connected to the white socket and the red plug in the red socket. 2. Plug the other end of the cable into the headphone or Line Out socket of the external source. ) 3. Press the FUNCTION button repeatedly to select a respective AUX mode ( that you have connected. 4. Turn on the external audio source and adjust volume level. 5.
TROUBLESHOOTING GUIDE If you have any trouble with the unit, please look through this chart and see if you can solve the problem yourself before calling your dealer. Problem Power does not come on when the unit is switched on. No sound comes out of the speakers. TUNER THE WHOLE UNIT The sound is noisy. Cause Unit is unplugged. The volume is turned down (to MIN). The input selector does not match the playback source. The unit is too close to a TV set or another similar appliance.
SPECIFICATIONS AMPLIFIER section Output Power Frequency Response FM section Frequency Response SPEAKER SYSTEM section Type Impedance …………. …………. 15W+15W+30W(subwoofer) 60 to 20,000 Hz …………. 87.5 to 108MHz …………. …………. 1-way 6 ohms (tweeter), 6 ohms (L&R), 4ohms (subwoofer) GENERAL Power Requirements Power Consumption Dimensions (W x H x D) …………. …………. …………. AC 120 V ~ 60 Hz 100W (RMS) 255 x 923 x 255 mm(approx.) Weight Standard Accessories …………. …………. 8.4 Kgs(approx.
