User's Manual

8
Listening to FM Radio
1. Press the button to select the FM tuning function.
2. Press the or button to manually tune to a desired station
3. You may also press and hold the or button to auto scan for a station.
4. Using the STOP or button you can scan through your preset stations.
(See how to preset a station in the section below.)
Adjusting for Best Reception
FM broadcast: Extend and reposition the FM antenna located on the back of the unit.
Preset Tuning
You can preset and store up to 20 FM radio stations.
1. Select your desired FM station.
2. To save the FM radio frequency shown, press button, and “P01” will flash on the
display. Then press button again before the indicator stops flashing and the
frequency shown will be saved as “P01”.
3. To continue saving another station, tune to the 2
nd
desired radio frequency:
a) Press button again to bring you to the list of the “P—“ stations.
b) Using the STOP or button, you can manually choose the desired preset
number (P01–P20). The manually selected number will flash on the display
c) Press the button before preset number “P—“ stops flashing.
Once pressed the frequency shown will be stored as the corresponding number “P—“.
4. Press the STOP or button to scan through your preset stations.
Listening to an External Audio Device (Auxiliary Mode)
In AUX (auxiliary) mode, this unit can play audio from an external audio device (iPod, MP3 Player,
Portable CD Player, etc.)
CONNECTING VIA AUXILIARY
1. Press the button to select the AUX-IN function.
2. Plug one end of the AUX IN cable (not included) into the AUX IN jack located
on the back of the unit.
3. Plug the other end of the cable into the headphone jack of your external audio device.
NOTE: Playback functions and operations are only available on your external device.