User's Manual

10
Specifications
GENERAL
Power Requirements AC 120 V~ 60 Hz
Power Consumption 35W
Dimensions (W x H x D) 278mm x 400mm x 168mm (approx.)
10.9 in x 15.75 in x 6.6 in
Weight 2.8 kgs (approx.)
6.17 lbs
AMPLIFIER
Output Power 5 W + 5 W
Frequency Response 60 to 20, 000 Hz
SPEAKER SYSTEM
Type 1-way
Impedance 8 ohms
Input Power Max. 10W
FM Radio
Range 88 to 108 MHz
CD PLAYER
Frequency Response 60 to 20, 000 Hz +/-4 dB
Signal-to-Noise Ratio 55 dB (IEC-A)
BLUETOOTH
Bluetooth Version Bluetooth V2.1+EDR
Bluetooth Profiles A2DP, AVRCP
Bluetooth Frequency range 2.402GHz-2.480GHz
Operating Distance 10 meters (33 ft.)
Troubleshooting Guide
GENERAL
Symptom Possible Cause Solution
• Unit will not power on. • Unit is unplugged. • Connect the unit to the AC
power supply.
• No sound output from
speakers.
• The volume level is set too
low.
•
The input selector does not
match the playback source.
• Adjust the volume.
• Select the correct input
source.
• Noise/Distortion in
sound output.
• The unit is too close to a TV
set or another interfering
device.
• Turn off the TV or other
appliance, and relocate the
unit.
• Unit fails to respond. • It might result from external
factors such as ESD
(Electro-static discharge).
• Disconnect the power cord
and external audio device.
Re-plug the power cord
after one minute.
FM RADIO
• Cannot listen to any
station, or signal
appears weak.
• The station is not tuned-in
properly.
• A TV set is being used nearby
and is interfering with the
radio reception.
• Properly tune-in the
desired station.
• Turn-off the interfering TV
set.