User's Manual

14
6) Adjust your recording volume to about middle (you can adjust on your next recording if too loud or
too low).
7) Place the needle on the record and then press “play/pause” button (it looks like this
).
8) Now you are recording.
9) When the last song is recorded from the one side of vinyl, press the “play/pause” button (
) to
pause.
10) When paused, flip the record to the other side and place the needle back to play.
11) Press the “play/pause” button again to resume recording.
12) When all recording is done, wait for about 10 seconds and then press the stop button.
Entering Recording (Paused) Mode
1. Press the “RECORD” button to enter Recording
(Paused) Mode. ( ) will appear on the left of the screen)
If an AUTO TRACK mode is selected, “AUTO TRACK” will
appear on the lower middle of the screen.