User's Manual

51
USB
-PC
No sound.
Have not selected the USB
PnP Audio Device for the
recording device in the
devices.
Microphone slider it is not at
full volume
Go back to the preferences
as shown above and make
sure that you have selected
the USB PnP Audio Device
for the recording device in
the devices.
Close Audacity, turn off the
turntable, unplug the USB
Cable. Then plug in the
USB Cable, turn on the
turntable and reopen
Audacity.
Please click on the
microphone drop-down
arrow and select Start
Monitoring.
Adjust the microphone
slider.
Poor sound quality
The stylus no connected to
the tone arm
USB cable near any other
cable
Check your stylus to make
sure it is secured to the
tone arm.
Ensure the USB cable is
not touching or near any
other cables.
PHONO
Decline in turntable audio
performance.
The turntable stylus is worn
out.
Replace the stylus.