User's Manual

Listening to an External Audio Device (BT Mode)

External devices which have a built-in Bluetooth feature can be connected to this apparatus and

play through the speakers.

GETTING CONNECTED

1.Press the Function button to select the Bluetooth mode.

2. Set the Bluetooth function of your external device ON.

3. Set to search Bluetooth device on your external device.

NOTE: The effective distance between your external device and this apparatus is 10 meters.

5. Wait for a while then find the “V50-200” on the paired devices list on your external device.

6. If a window asks you a password. Fill in “0000”or“1234” then press “OK” on your external device.

7. A few seconds later your Bluetooth connection should be achieved.

Listening to an External Audio Device (AUX Mode)

In AUX (auxiliary) mode, this unit can play audio from an external audio source (iPod, MP3 Player,

Portable CD Player, etc.)

There is an AUX IN jack on the back of the unit. When connecting a device that has a headphone

jack, use the cable with 3.5mm plugs on either end with the front AUX IN jack.

1. Plug one end of the AUX IN cable (not included) into the AUX IN jack.

3. Plug the other end of the cable into the headphone jack of the external audio source.

NOTE:

1. All operations are only available on your external device.

2. When insert

AUX IN cable (not included) into the AUX IN jack.

only VOLUME knob can

work.

Maintenance / Proper Handling

Compact Disc Handling

• Always place the disc on the disc tray with the label side facing upward (compact discs can be

played/recorded only on one side).

• To remove a disc from its storage case, press down on the center of the case and lift the disc

upward, holding it carefully by its edges.

• To clean a disc, wipe the surface from the center hole outward towards the outer edge with a soft,

dry cloth.

• Never use such chemicals as record spray, antistatic sprays or fluid, benzine or thinner to clean

discs; they will irreparably damage the disc’s plastic surface.