User's Manual


2. Press  (NEXT) BUTTON/ (PREVIOUS)
BUTTONtoselectatrack.
Thedisplayshowstheselectedtrack.
3. Press the PROGRAM button on the remote
controltoaddthetrackintotheprogramlist.

4. Repeat steps 2 and 3 to till you accomplish the
programming.
Youcanprogram
upto20tracks.
TOSTARTTHEPROGRAMPLAY
PressPLAY/PAUSEbutton.
TOPAUSEORSTOPAPROGRAMPLAY
PressPLAY/PAUSEorSTOPbutton.
TOREPLAYAPROGRAM
PressPLAY/PAUSEbutton.
TOREVIEWTHECONTENTOFAPROGRAM
Press STOP button then keep pressing the
PROGRAM button to
 review the programmed
tracks.
TOCLEARTHEPRORAM
Press STOP button twice and the “PROG” will
disappearfr omthedisplay.
Open and close the CD door to clear the program
play.
Afterplay,removetheCD.

DISCSMAINTENANCE
Dependingonthequalityofthediscandtheconditionoftherecording,someCD‐R/CD‐RWdisc
maynotbeplayable.

1. Alwaysplace the compact disc in the disctray with the label facing upward.(Compact discs
canbeplayedonlyononeside).

2. Tomoveadiscfromitsstoragecase,pressdownonthecenterofthecaseandliftthediscout,
holdingitcarefullybytheedges.