User Manual

1
AUX IN OPERATION
Any external (auxiliary) audio source (i.e., personal CD player or MP3 player) connected to this
appliance can get necessary signal and channel the speaker outputs.
1. Press POWER button to turn the unit ON and then press FUNCTION button to select “AU”.
2. Set the volume level to the minimum level with the VOLUME KNOB.
3. Plug the AUX IN cable (not included) into the AUX IN socket at the rear of the unit.
4. Plug the other end of the cable into the headphone or Line Out socket of the external source.
4. Turn on the external audio device and set it play. Turn the external audio device’s volume up to
2/3. If necessary adjust the volume on the unit by switching the volume knob.
BLUETOOTH CONNECTIVITY
External devices which have a built-in Bluetooth feature can be connected to this apparatus and
play through the speakers.
GETTING CONNECTED
1. Slide FUNCTION switch to the Bluetooth position (in the middle of the function button) and
then the display shows “BT”.
2. Set the Bluetooth function of your external device ON.
3. Set to search Bluetooth device on your external device.
NOTE: The effective distance between your external device and this apparatus is 10 meters.
5. Wait for a while then find the “Fihonest” on the paired devices list on your external device.
6. If a window asks you a password. Fill in “0000”or“1234” then press “OK” on your external
device.
7. A beep sound should be heard that indicates a connection has been established.
8. A few seconds later your Bluetooth connection should be achieved.
ENJOY MUSIC FROM AN EXTERNAL DEVICE
1. Get your external device paired. (See “Getting connected”)
2. Turn on the music player program on your external device and set it play.
Normally, you can control music playback with the PLAY/PAUSE, and button on the
apparatus. However, some buttons may not work due to the variable music player program.
Now enjoy the fun.
USING THE REMOTE CONTROL
The Remote Control Unit can operate the unit from a distance. When operating the remote
control unit, point it towards the front panel of the unit.
• Even if the remote control unit is operated within the effective range, remote control
operation may be impossible if there are any obstacles between the unit and the remote
control.
• If the remote control unit is operated near other appliances which generate infrared rays, or