User Manual

1
Product introduction
Intelligent recharge
Sh ort pres s th e button to enable
intelligent recharge.
If th e ora n ge i n d i c a t o r remains lit, it
suggests that the Pr oduct has a low
battery.
Power-on/off/sweeping planning
Short press “Start/Pause” to sweep.
Long press this button for 3s topower on or off.
If the indicator remains lit in blue, it suggests
successful network configuration, normal
running or a standby state.
If the indicator is breathing in blue, it suggests a
power-on or recharge state of the Product.
If the indicator is breathing in blue, it suggests
that the Product is in a hardware upgrade or
restoration to its defaults.
If the indicator is flashing slowly in blue, it
suggests that a state of network configuration.
If the indicator remains lit in orange, it suggests
ta low battery.
If the indicator is flashing quickly in red, it
suggests that the Product is abnormal.
If the indicator is out, it suggests that the
Product has powered off or is sleeping.
Infrared receiving sensor
Reset: For forced power-off
Short press this button (for less than 3s) to
power off.
Network configuration
Press buttons “ ” and “ ” at the
same time for 5s after power-on and
release them upon a voice prompt that
“WiFi has been reset”to enter the
networ configuration.