Installation Instructions

1:14 2.4G All-terrain Off-road Climbing Car
1. Know Your Remote Control 2.Instructions For Remote Controller and RC Car
Installation
14+
2
1
5
4
Forward
Backward
3
The remote controller
uses 2x1.5V AA batteries
(Not Included)
CAR
(Battery Included)
Notes: Please take out the
battery if not in use for a
long period of time.
1
Turn Left/Turn Right
2
Indicator Light
3
Forward/Backward
4
Power Switch
5
High/Low Speed Switch
USB Charging Instructions
1. Charge the battery before the first time you use it. The battery might discharge if not in use for a
long period of time. However, overcharging might lead to a loss of battery life.
2. Inspect the charging cord, plug, housing and other parts on a regular basis. If you find something
damaged, please immediately stop using it and fix the damaged part.
3. Do not connect the RC truck to other power connectors, which are not recommended. Ensure that
the USB charging cable connects to the original battery and allow for about 3.5 hours to be fully
charged, which will give about 30 minutes of playing time.
4. Please use appropriate adapter for charging and do not use quick chargerinstead.
5. The appropriate adapter has an input of 100-240V 50-60Hz 0.2A and an output of 5.0V 500mA
0.5-1.5A.
6. Connect the battery with the USB charging cable. Tocharge the battery, connect the USB
charging cable to charging devices with USB interface, such as desktop, laptop, power bank, USB
socket for USB adapter, etc.
3.Remote Control Driving
12
Forward
3
Turn Left
Backward
4
Turn Right
5
Right
Fine-tuning
Left
Fine-tuning
High/Low
Speed
Switch
*Please read this manual carefully before operation and keep it properly for future reference.
Accessories:
1.USB Charging Cable
2.Rechargeable
Battery Pack (included)
3.7V
6