Product Card

Power on The indicator flashed three times.
Standby The indicator is not on
Wireless Charging Indicators in breathing lamp status
Abnormal State Protector Start Indicator lights flashing
Error prompt Indicator lights flicker fast
Tip: Due to the different code-setting time of each mobile phone, some wireless charging mobile
phones will not start charging until about 3 seconds, which is a normal phenomenon. In order to
achieve the best charging speed, it is necessary to place the mobile phone in the wireless
charging position.
Applicable to wireless charging equipment:
1. The device has built-in wireless charging receiving devices (iphone 8, iPhone X, Samsung
S6, etc.).
2. Equipments with protective jackets for receiving devices (iphone 7 series, etc.) should be
installed.
(Note: These receivers must conform to WPC QI standards for compatible use)
Cleaning and maintenance
Wipe the adapter, data line and charging seat with a clean rag or paper towel. Rigorously wash in water.
2. Please wash the cups by hand. Do not use dishwasher to clean them.
Ceramic cups can be dried and disinfected at 150 C/302 but can not be heated in microwave oven or oven.
Troubleshooting
Problem Possible causes what to do
No power the grid is out of power Change the power socket
No power The power cord plug is not in placed Put the power cord plug in place
No power Adapter or power cord is broken Replace
No power Charging block circuit is bad Contact the dealer
Flashing light The appliance is not in place Put the appliance in place
Flashing light The cup is heated for more than 8 hours Pick up the cup and put it back in the cradle
Product characteristics
1. Wireless mobile phone charging is compatible fast charging at the same time. Qi standard and FOD foreign
body detection are compatible to avoid metal empty consumption and fever danger and charge safely.
2. Wireless heating The base does not give off heat. Safety does not burn hands. The insulation temperature is