Instruction Manual

Start / Standby/ Sleep
1, Start/ Pause
a, Switch On the robot vacuum cleaner
b, Press “ ” of touch panel and wait for the blue indicator
light not twinkling, press it again to start the robot cleaner.
2, Standby
Standby means the robot is power on and awaiting for user’s
operation
a, When robot in working status, press “ ” on robot or
“ON/OFF” on remote control to make robot vacuum cleaner
enter Standby status.
3, Sleep
In Sleep mode, press “ ” on robot or “ON/OFF” on remote
control to wake up the robot vacuum cleaner. In Sleep mode,
the robot could maximumly save battery capacity.
a, in Standby mode, the robot cleaner will enter Sleep mode
automatically in 10 minutes if no operation command.
b, if robot cleaner failed back to charge station, it will enter
Sleep mode automatically.
!Attention: in Sleep mode, the robot cannot be waken up in
app, should operate with “ON/OFF” on remote control, or
“ ” on touch panel of robot.
Schedule
Please refer the details of App Using Guide : Schedule Setting
Step 6 Install Electronic Controlled Water Tank
and Dust Bin
Install the micro fiber onto the
velcro hook of the water tank
Open the rubber cap of water tank
Contactor of water tank
Open the rubber cap, add water inside
and close the cap.
Please keep the contactor dry and clean.
Install dust bin onto the water tank kit,
make sure the handle placed well
Buckle
Press the buckle of the water
tank, and install it into the robot
vacuum cleaner