Instruction Manual

Connect the charge station to the power, and place it against
the wall, clear the obstacles 1 meter left / right side to the station,
and 2 meters in front of the station. After that put the robot cleaner
to the charge station, it will start charging automatically.
Tips: Please make sure charge time over 5 hours in first time.
Please switch on the
robot before charging
Step 3: Clear Obstacles
Pick up curtain rope, and entangled wires
Pick up curtain, bedsheets hanged more than 5cm over the ground
Clean water stains over the ground
Tips
1, Big garbage easy to block the vacuum port and stuck the wheels,
entangled wires easy trap the robot cleaner.
2, Robot cleaner cannot vacuum the water, it may damage the moth
-board and motors.
Pick up peel , paper, clothes etc. on the floor
Step 4: One Key to Start
Press “ ” on the robot vacuum cleaner to start / Pause the
cleaning, when cleaning over, robot will go back to the charge station
automatically, please keep the charge station power plugged in.
Step 5: Empty the Dust Bin
Tips: empty dust bin on time to make the robot cleaner keep
cleaning effectively.
Press the buckle of the dust bin
Pull out of the dust bin
One hand press the buckle of dust bin, another hand open the
top cover. Be careful not drop the dust out in opening.
Empty the dust bin