Instruction Manual

Maintenance

Side Brush

Please clean the side brush every week, if the brushes out of shape,

put them into 90° hot water over 5 seconds, it will restore.

Tips : we suggest change new side brushes every 3-6 months

Water Tank and Filters

Please follow steps to clean water tank and filters:

1.Please press the buckle of water tank and pull it out2.Pull up the handle of the dust bin

3.Take out of the dust bin

4.Pull the buckle of the dust bin

and open it

5.Take out of the filters

6.Empty the dust bin

7.Wash the dust bin and use

brush to clean the filters

8.Install filters back to the dust bin

Please clean the charging contactors of the station and robot

regularly with a soft cloth, never let the sensor get wet.

Charging Contactors

Charge Contactors

Normal Dust Bin and Filters

Please empty dust bin on time as steps:

7. Install the filters back to the dust bin6. Wash the dust bin and clear the filters with brush

5. Empty the dust bin

4. Take out of the filters

3. Press the buckle and open

the top cover of dust bin

1. Press the buckle of dust bin and pull it out 2. Take out of dust bin

Please make sure the primary filter is dry when you install it

back to dust bin.

!Attention