Instruction Manual

Battery Charging
When battery level less than 20%, the
robot vacuum cleaner will go back to
Or you can use the remote control or
“Coayu Robot”app to drive the robot
cleaner going back to the station.
Please keep the charge station in power all 24 hours, then the robot
could always receive the signal of the station.
the charge station automatically.
Also you can manual charge the robot cleaner directly like Fig 2.
Fig 1 Fig 2
Ways to extend battery life effectively
a, charge the robot cleaner over 5 hours in first time charging.
b, please charge on time when battery capacity is less than 20%.
c, when robot finish the cleaning or battery capacity less then 20%, the
robot vacuum cleaner will go back to the charge station automaticall
d, please fully charge the robot cleaner and switch off when you will
not use it for a certain time.
e, If you did not use the robot over 3 months, please charge over 5 hours
firstly, and then use it for cleaning.
Cleaning Mode
1.Automatic Cleaning
In Standby Mode, press “ ” on
robot or “ON/OFF” on remote
control to enter auto cleaning mode.
2.Max Cleaning
Press “MAX” on remote control, the
robot will enter powerful cleaning
mode, bigger power in vacuum.
3.Mode Cleaning
Press “MODE” on remote control
to enter Mode Cleaning:
a, Press “MODE” on remote control to enter MODE 1 cleaning: robot
will start edge cleaning.
b, Press “MODE” again, the remote
control will display MODE 2: the
robot will cleaning in a 2 x 2m area.
c, Press “MODE” again, the remote
control will display MODE 3: the
robot will cleaning in random.
d, Press “MODE” again, the remote
control will display MODE 4: the
robot will deep clean one area twice.
e, Press “MODE” again, the remote
control will no display MODE
anymore, robot enter Standby status.
Start
End
4.Schedule Cleaning
If you set schedule cleaning in “Coayu
Robot” app, the robot will cleaning
automatically at the setted time.