Users Manual

X3HH/X3PP

In the power-on state, press the CH button of the handheld microphone

for 2 seconds to enter the frequency modulation mode. When the channel

on the display screen is flashing, click the CH button to switch the

frequency code, and each click switches a frequency code. Press the CH

button again for 2 seconds to confirm the frequency code and enter the

automatic frequency matching mode with digital scrolling display "----".

Align the IR matching window of the handheld microphone with the IR

matching window of the receiver in a straight line (the matching distance is

recommended to be between 10cm-50cm). Click the power switch of the

receiver to enter the frequency matching mode, and the corresponding

channel signal of the receiver flashes red and green. After the matching is

successful, the receiver lights up green.

Note: After the handheld microphone enters the frequency matching

mode, please complete the operation within 5 seconds. If the matching

fails, please repeat the above steps.

Handheld microphone

Bodypack transmitter

In the power-on state, press the SET button of the bodypack transmitter

for 2 seconds to enter the frequency modulation mode. When the channel

on the display screen is flashing, click the "+" or "-" button to switch the

frequency code, and each click switches a frequency code. Press the SET

button again for 2 seconds to confirm the frequency code and enter the

automatic frequency matching mode with digital scrolling display "----".

Align the IR matching window of the bodypack transmitter with the IR

matching window of the receiver in a straight line (the matching distance is

recommended to be between 10cm-50cm). Click the power switch of the

receiver to enter the frequency matching mode, and the corresponding

channel signal of the receiver flashes red and green. After the matching is

successful, the receiver lights up green.

Note: After the bodypack transmitter enters the frequency matching mode,

please complete the operation within 5 seconds. If the matching fails,

please repeat the above steps.