Users Manual

20
Transmitter installation
1. Install the battery: Press the retractable button to take out the battery
compartment, install 2 AA batteries according to the positive and
negative polarity marked on the battery compartment (pay attention
not to install the batteries reversely), and push the battery
compartment into the battery holder of the transmitter until the
retractable button is fastened in place with a "click" sound as shown in
Figure A.
Figure A
① Signal symbol: Display the status of the microphone RF signal.
② Battery power: The battery power has three bars, and the number of
bars represents the battery power. When the battery is low, the battery
symbol flashes.
③ Working frequency: Display the current working frequency code of the
microphone. Channel A displays CH01-CH32, and channel B displays
CH33-CH64.
④ Signal channel: working signal channel of the microphone.
①②
④
③
Display screen
CHB
X3HH/X3PP