Users Manual

17
■ Function instruction
① Power button: Keep pressing it for 2 seconds to turn on/off the mic.
When the mic is on, press it for infrared matching.
② Volume knob: Adjust the volume of the corresponding channel; turn
clockwise to gradually increase the volume, and turn
counterclockwise to gradually decrease the volume.
③ Signal LED: Display the working status of the corresponding channel.
When the RF is not received, it keeps lighting up red; when the RF is
received, it lights up green. During frequency matching, it flashes red
and green.
④ IR matching window: Receive infrared matching signal during
matching.
Front panel
⑤ Type-C connector/interface: Connect a power adapter or a mobile
power supply.
⑥ Audio output connector/interface: Connect OUT-A or OUT-B to output
the mixed microphone signal; connect OUT-A and OUT-B to
independently output the microphone signal.
①
②
③
④
⑤⑥
Rear panel
X3HH/X3PP