User's Manual
Table Of Contents
Quick Reference Guide
3.4 Writing Tags
The APTool allows you to write information to the Bank3 user memory of a RFID tag.
To proceed with writing onto the tag :
• Put a RFID tag onto the reader
• Read the tag (see Reading Tags)
• Select the "RFID Write" tab and write information in the input line
• Click the "Write" button
The RFID tag might be password protected.
Problem write failed!
• Reason: Power setting may be too low.
Please refer to page 9 – Set Power Dialogue to adjust the power settings.
• Reason: Tag may be password protected.
Please refer to page 8 – Set Password Dialogue
GTSYS LTD. 23/F Heng Shan Centre, 145 Queen's Road East, Wan Chai, HONG KONG SAR – Email: sales@gtsys.com.hk
Copyright © 2011 GTSYS – GTSYS reserves the right to change specifications without prior notice Page 7 / 11
Illustration 3: RFID Write Tab