Quick Reference Guide

2 Installing the IR-U-POE/IR-E-POE

2.1 Installation pre-requirements

• PC with a minimum Pentium 4 class CPU

• Microsoft ® Windows 10, Linux or MAC

• 100 MB available hard drive space

• Ethernet TCP/IP network with DHCP service

2.2 Software installation

For the reader to work properly, install the programs on your computer before you connect your Reader to your

computer.

1. Insert the accompanying CD into the CD tray of your computer.

2. Start the APTool-installer-v3.0.0.exe program from the CD and follow the instructions in the installation

wizard.

3. Make sure your PC is connected to the same network as the Integrated RFID Reader.

4. Install the Integrated RFID Reader to a proper mounting pole and connect the Ethernet port with the

PoE-Injector. The Injectors data port must connected to the network with DHCP service available.

Power-up the PoE-Injector.

PC (running Windows 10)

RFID Reader

Access point

PoE-Injector

Next chapter: 3Start APToolUniversal

GTSYS LTD. R07 9/F Kwai Shing Ind. Bld Phase 2, 42-46 Tai Lin Pai Road, Kwai Chung, HONG KONG SAR – Email: sales@gtsys.com.hk