Quick Reference Guide

Quick Reference Guide
5 Set Password Dialogue
The EPC/Gen2 RFID tags have a feature to protect information with a password this dialogue
allows you set a password while reading or writing onto a RFID tag.
5.1 To set a password
• Select “Settings->Set Password” from the top menu bar
• Type a 8 charter hexadecimal password
• Click on “OK”
5.2 To reset the password ( to default )
• Select “Settings->Set Password” from the top menu bar
• Type “00000000” into the input line
• Click on “OK”
GTSYS LTD. R07 9/F Kwai Shing Ind. Bld Phase 2, 42-46 Tai Lin Pai Road, Kwai Chung, HONG KONG SAR – Email: [e-mail]
Copyright © 2020 GTSYS – GTSYS reserves the right to change specifications without prior notice Page 10 / 11
Illustration 6: Password Dialogue
Password input in hexadecimal charters (0-9,a-f) with a length of 8, the default value is 00000000