Quick Reference Guide

Quick Reference Guide
3.5 Writing Tags
The APTool allows you to write information to the Bank3 user memory of a RFID tag.
To proceed with writing onto the tag:
• Put a RFID tag onto the reader
• Read the tag (see Reading Tags)
• Select the "RFID Write" tab and write information in the input line
• Click the "Write" button
 The RFID tag might be password protected.
 Problem write failed!
• Reason: Power setting may be too low.
Please refer to page 11 – Set Power Dialogue to adjust the power settings.
• Reason: Tag may be password protected.
Please refer to page 10 – Set Password Dialogue
GTSYS LTD. R07 9/F Kwai Shing Ind. Bld Phase 2, 42-46 Tai Lin Pai Road, Kwai Chung, HONG KONG SAR – Email: [e-mail]
Copyright © 2020 GTSYS – GTSYS reserves the right to change specifications without prior notice Page 8 / 11
Illustration 4: RFID Write Tab