User's Manual

GTRAN Wireless Inc.
4
2. WINDOWS 98, 2000, ME, AND XP
2.1 INSTALLATION
Step 1: Software Installation
You must install the software from the CD before inserting the DotSurfer
modem card!
a. Make sure that the DotSurfer card is
not
inserted into the PCMCIA slot.
b. Close all the other programs that are running before starting the application. Insert the
installation software CD into your CD-ROM drive. The InstallShield Wizard should run
automatically. If it does not, click Start-> Run and enter d:\Setup.exe. Replace d: with the
drive letter for your CD-ROM drive, if necessary.
c. The InstallShield Wizard will guide you through the installation.
d. From the Setup screen, choose Typical and click Next> and follow the rest of the
instructions.
e. Restart your computer.
Step 2: Driver Installation
Insert the DotSurfer modem card into the PC slot of your laptop.