User's Manual
Table Of Contents
- USER MANUAL
- 1. DOTSURFER INTRODUCTION
- 2. WINDOWS 98 & 98SE, 2000, ME, XP, AND NT 4.0
- 2.1 INSTALLATION FOR WINDOWS 98 & 98SE, 2000, XP AND ME
- 2.2 INSTALLATION FOR WINDOWS NT 4.0
- 2.3 UNINSTALLING THE DOTSURFER DRIVER AND PROGRAM FOR WIN 98
- & 98SE, 2000, ME, XP, AND NT 4.0
- 2.4 USING GT DIALER
- 2.5 SMS
- 2.6 FAX - CONFIGURING DOTSURFER FOR WINFAX PRO
- 2.7 GT INDICATOR
- _
- 2.8 UPDATING THE GT DIALER (GT UPDATER)
- 3. WINDOWS CE 3.0 AND POCKET PC 2002
- APPENDIX A: PRODUCT SPECIFICATIONS
- APPENDIX B: SAFETY AND REGULATORY INFORMATION
- GTRAN WIRELESS, INC. LIMITED WARRANTY & LIABILITY
DotSurfer
2. WINDOWS 98 & 98SE, 2000, ME, XP, AND NT 4.0
2.1 INSTALLATION FOR WINDOWS 98 & 98SE, 2000, XP AND ME
You must install the software from the CD before inserting the DotSurfer
modem card!
a. Close all the other programs that are running before starting the application. Insert the
installation software CD into your CD-ROM drive. The InstallShield Wizard should run
automatically. If it does not, click Start-> Run and enter d:\Setup.exe. Replace d: with the
drive letter for your CD-ROM drive, if necessary.
b. The InstallShield Wizard will guide you through the installation.
c. From the Setup screen, choose Typical and click Next> and follow the rest of the
instructions.
d. Restart your computer.
e. Insert the DotSurfer modem card into the PC slot of your laptop. Windows will automatically
search for and load a device driver for the DotSurfer modem card. You will see the screen
below. Once the device driver is loaded, the screen will disappear.
4