User's Manual
Table Of Contents
- USER MANUAL
- 1. DOTSURFER INTRODUCTION
- 2. WINDOWS 98 & 98SE, 2000, ME, XP, AND NT 4.0
- 2.1 INSTALLATION FOR WINDOWS 98 & 98SE, 2000, XP AND ME
- 2.2 INSTALLATION FOR WINDOWS NT 4.0
- 2.3 UNINSTALLING THE DOTSURFER DRIVER AND PROGRAM FOR WIN 98
- & 98SE, 2000, ME, XP, AND NT 4.0
- 2.4 USING GT DIALER
- 2.5 SMS
- 2.6 FAX - CONFIGURING DOTSURFER FOR WINFAX PRO
- 2.7 GT INDICATOR
- _
- 2.8 UPDATING THE GT DIALER (GT UPDATER)
- 3. WINDOWS CE 3.0 AND POCKET PC 2002
- APPENDIX A: PRODUCT SPECIFICATIONS
- APPENDIX B: SAFETY AND REGULATORY INFORMATION
- GTRAN WIRELESS, INC. LIMITED WARRANTY & LIABILITY
DotSurfer
3.2 UNINSTALLING THE DOTSURFER DRIVER AND PROGRAM
Note: The DotSurfer modem card must be removed from your iPAQ.
a. Set up your iPAQ Pocket PC for synchronization with your PC. For help with this procedure,
please look at the user manual for the iPAQ Pocket PC.
b. Insert the DotSurfer installation CD into your PC. Click Cancel on the following screen.
c. Click on Start -> Run and enter d:\Wince\Sa1110\English\setup.exe. Replace d: with the
drive letter for your CD-ROM drive, if necessary.
Note: Replace English with Espanol or Portugues for the specific language that you want
installed.
For example
[CD_Drive]:\Wince\Sa1110\English\Setup.exe for English
[CD_Drive]:\Wince\Sa1110\Espanol\ Setup.exe for Spanish
[CD_Drive]:\Wince\Sa1110\Portugues\Setup.exe for Portuguese
d. Press No
button from the Application Already Installed screen to proceed.
e. From the Add/Remove Programs screen, select GTRAN Wireless GT Dialer and click
Remove.
29