User Guide

40
AUTOMATIC
G
ATE
L
OCK
®
ELECTRO
NIC SEC
URITY
L
OCK
ACCESSORIES
SOLAR PANEL (FM123), (FM122)
The Solar Panel (FM123) is a 10 watt solar powered battery charger for use with the all GTO/PRO
DC gate operator systems. Particularly suited for remote installations, each Solar Panel comes
with tubular steel support, mounting clips, wire connectors, and 8 ft. of low voltage wire (see Low
Voltage Wire for additional wire). The GTO/PRO®
control board has clearly labeled terminal
connections for easy installation of the Solar Panel. Installation in some regions of the world will
require multiple solar panels for adequate charging power.
Solar Panel (FM122) is a 5 watt solar
powered battery charger with all the same features as (FM123).
PUSH BUTTON CONTROL (RB101)
Unlit doorbell button for remote entry or exit control. Wires directly to the control board and uses 16
gauge multi-stranded, dual conductor low voltage wire (sold separately).
PIN LOCK (FM345)
The Pin Lock substitutes for the clevis pin at the front end of the GTO/PRO® 1500 gate operator.
Helps prevent theft of the operator from the gate, while allowing quick release of the operator.
KEY CHAIN MINI TRANSMITTER (RB744)
The Key Chain Mini Transmitter is a miniature version of the GTO/PRO® entry transmitter and has
the same adjustable code settings. 12V A23 battery included.
ENTRY TRANSMITTER (RB741)
The GTO/PRO® entry transmitter, with adjustable code settings, is standard equipment with all
GTO/PRO®
systems. 12V A23 battery included.
DIGITAL KEYPAD (F310)
The specially designed digital keypad can be easily installed as a wireless or wired keypad. It can be
programmed to use up to 25 different personal identification number (PIN) codes. Each code is face
programmable with additional security features built in. Wired installations require 16 gauge, low
voltage, multi-stranded, dual conductor, direct burial wire (sold separately). Requires 3 AA batteries
(not included).
GTO/PRO 50' EXIT WAND (FM139), 100' EXIT WAND (FM140), 150' EXIT WAND (FM141)
The GTO/PRO® Exit Wand is designed for residential and agricultural applications and is
compatible with all GTO/PRO® automatic gate operator models. The wand is an electromagnetic
sensor, which offers 'hands free' operation of the GTO/PRO®
Gate Operators with a 12 ft. radius of
detection of vehicles in motion.
AUTOMATIC GATE LOCK PULL-TO-OPEN (FM144)
A MUST for added security. Solenoid driven, with a steel housing. Unlocks and locks automatically
as gates open and close. Used with GTO/PRO® DC swing gate operating systems for maximum
stability and security. Comes with a keyed manual release. Recommended for gates over 8 ft. long.
Ideal for animal enclosures or high wind areas.
1500
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PRS
8
TUV
9
WXY
0