User Guide

6
Intercom Installation
Find a convenient location near an approved outlet to
mount or place the intercom. Plug the transformer into
the AC outlet and connect it to the intercom’s power
jack marked DC 9V.
If you are mounting the intercom on the wall, use the
template on the last page of this manual to place screws.
The intercom can be disconnected from the transformer
and used as a battery powered unit. It can be moved to
any convenient location, i.e. bedroom, patio, or garden
area.
IMPORTANT: The base unit is always ON and
in the receive mode. Therefore the battery will last
approximately two (2) hours when unplugged from the
transformer.
I
D
S
ET
Remove the battery access cover using a small
phillips head screwdriver. Plug the rechargeable
Ni-Cad battery into the receptacle inside the battery
compartment. See diagram to the right. When this is
done, replace the battery access cover.
Connecting the Battery
Connecting the Transformer
Battery Plug
Battery
POWE
R
Ke
y
pa
d
Batt Lo
w
G
ra
n
t
P
er
m
is
s
i
o
n
An
s
we
r
DV 9V
Transformer
Approved 110 Vac outlet
IMPORTANT: Once connected, allow the intercom
base unit’s battery to charge for 12 hours before us-
ing the system for the first time.