User Guide

AUTOMATIC
G
ATE
L
OCK
®
ELECTRO
NIC SEC
URITY
L
OCK
Other GTO/PRO
Access Controls and Accessories
Push Button (doorbell) Control (RB101)
Unlit doorbell button for remote entry or exit control. Wires directly to the control board and
uses 16 gauge (AWG), multi-stranded, dual conductor low voltage wire (sold separately).
Pin Lock (FM134)
The Pin Lock substitutes for the clevis pin at the front end of the GTO/PRO® gate openers.
Helps prevent theft of the opener from the gate, while allowing quick release of the opener.
Key Chain Mini Transmitter (RB744)
The Key Chain Mini Transmitter is a miniature version of the GTO/PRO® entry transmitter and
has the same adjustable code settings. 12 Volt battery included.
Entry Transmitter (FM135)
The GTO/PRO® entry transmitter, with adjustable code settings, is standard equipment with all
GTO/PRO® systems. 12 Volt battery included.
Digital Keypad (FM137)
The specially designed digital keypad can be easily installed as a wireless or wired keypad. It
can be programmed to use up to 25 different personal identification number (PIN) codes. Each
code is face programmable with additional security features built in. Wired installations require
16 gauge (AWG), low voltage, multi-stranded, dual conductor, direct burial wire (sold sepa-
rately). Requires 3 AA batteries (not included).
GTO/PRO 50’ Exit Wand (FM139), 100’ Exit Wand (FM140), 150’ Exit Wand (FM141)
The GTO/PRO® Exit Wand is designed for residential and agricultural applications and is
compatible with all GTO/PRO® automatic gate operator models. The wand is an electromag-
netic sensor, which offers ‘hands free’ operation of the GTO/PRO® Gate Operators with a 12 ft.
radius of detection of vehicles in motion.
Automatic Gate Lock Pull-to-Open (FM144)
A MUST for added security. Solenoid driven with a steel housing. Unlocks and locks automati-
cally as gates open and close. Used with the Mighty Mule® system for maximum stability and
security. Comes with a keyed manual release. Recommended for gates over 8 ft. long. Ideal for
animal enclosures or high wind areas.
Low Voltage Wire (RB509)
The 16 gauge (AWG), multi-stranded, dual conductor Low Voltage Wire is for connecting the
AC powered transformer, or the Solar Panel to the control board. Also used for connecting ac-
cessories, such as locks, keypads, push buttons and other wired control devices. This specially
designed wire is UV treated, PVC coated and ready for direct burial. Available in 1000' rolls or
special lengths.
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PRS
8
TUV
9
WXY
0