User's Manual

Mighty Mule 202 17
Mounting the Opener
Level Opener
Gate In Open Position
LEVEL horizontal cross member
Post Bracket Assembly
bolted to fence post
Clevis Pin, Bushing, and Hairpin Clip
Clevis Pin, Washer, and Hairpin Clip
Gate Bracket bolted
to gate cross member
Fence Post
Installation of the SECOND Gate Opener
Step 9
Attach the opener to the securely bolted post bracket assembly and gate bracket using clevis pins, bushings,
and hairpin clips, or optional Pin Locks (see Accessory Catalog). Verify that the opener is level and adjust the
post bracket assembly if necessary.
Install the SECOND gate opener and hardware on the SECOND gate following the same procedures as the
FIRST gate opener and hardware (Step 1 - Step 9).
The power cable for the Second Opener should be run in PVC conduit under te driveway to protect it from
damage due to lawnmowers, heavy equipment and other damaging forces. It will also make it simple to
remove or replace the Second Opener if it is ever damaged.
NEVER SPLICE opener arm POWER CABLES. This will cause performance problems and may damage the
opener.