User's Manual

IMPORTANT SAFETY INSTRUCTIONS
Mighty Mule 202 7
Warning signs (4 enclosed) to be installed on both sides
of each gate (3–5 feet above the bottom of the gate)
!
Product identification label (2)
installed under rear mount of each arm
Control box label (1)
installed on front of the control box
Logo and warning labels (4)
installed on each side of opener housings
GTO DC SW200 Series
Conforms to UL325
5th Edition Standards
Serial No. MM202-0000000
mm/dd/yy
GTO, Inc. - Tallahassee, Florida USA
TO MANUALLY OPEN AND CLOSE THE GATE
1. Turn opener power switch OFF.
2. Disconnect front or rear mount from mounting bracket.
3. Pull opener away from mounting bracket and move gate.
Disconnect opener ONLY when the power switch is
OFF and the gate is not moving.
®
E-Z GATE OPENER
®
202
DUAL
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or play in gate area.
3. This gate is for vehicles only. Pedestrians must use separate entrance.
.BYJNVN(BUFMCTLHGUNt7oltage: 12 Vdc;
Frequency: 0Hz; PPXFS8t$MBTT***BOE***7ehicular Swing Gate Operator
®
E-Z GATE OPENER
®
202
DUAL
These warning labels should
be found at the locations
specified below. If any are
missing, immediately contact
GTO for replacements.