Operating Manual
11
Holding onto the AirRam K9 with one hand,
pull the bin handle and lift the bin out of
the AirRam.
Remove the lter from the inner shroud,
by twisting and pulling.
Tap the inner shroud over a bin to remove
any excess dirt.
Wash the lter under a tap. Squeeze
out any excess water then let it dry
completely before reinserting into the
AirRam. Recommended water temp 40ºC
do not use detergent. Never put bin back
without lter inside. You could damage
the motor.
Pull the lter out of the lter housing.
Tap the dirt from the lter and tip any
dirt from the lter housing.
Wash the lter if necessary.
Cleaning the lters - do this once a month or more frequently depending on use.