Model number: AR30 OPERATING MANUAL
IMPORTANT SAFEGUARDS: IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE. RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. Do not use in rain or leave outdoors whilst raining. WARNING: Basic safety precautions should always be observed when using an electrical appliance, including the following to reduce the risk of fire, electrical shock, or injury: Personal Safety: • Store indoors in a dry place out of the reach of children. • Always use responsibly.
• In an emergency situation contact professional help immediately! • Leaks from the battery cells can occur under extreme conditions. Do not touch any liquid that leaks from the battery. If the liquid gets on the skin wash immediately with soap and water. If the liquid gets into the eyes, flush them immediately with clean water for a minimum of 10 minutes and seek medical attention. Wear gloves to handle the battery and dispose of immediately in accordance with local regulations.
Thank you for choosing a Gtech AirRam K9 “I started Gtech to create sensible, easy to use products, which do a great job. Your opinion is important to us. Please take the time to write a review of the AirRam K9 at Trustpilot.co.uk. We will use your feedback to improve our products and services and let other people know what it’s like to be part of the Gtech family.
Assembly Fit the two components of the Upper Handle together in the orientation shown in the image above. They will only fit together one way. The components will click into place and will remain permanently fixed. Fit the two components of the lower handle together in the orientation shown in the image above. They will only fit together one way. The components will click into place and will remain permanently fixed.
Assembly (continued) The green locking clip, when correctly fitted, will click and and hold the lower handle in place. Should the handle assembly need to be removed the clip can be pulled out to unlock the lower handle. The green locking clip remains permanently attached to the head assembly. Insert the upper handle into the lower handle. You will need to press the button on the upper handle to fit it in. Once it slides down you will hear it click into place.
Installing scented cartridge Slide the filter and inner shroud out of the filter housing. Remove the filter from the inner shroud, by twisting and pulling. Remove the scented cartridge from its box then slide the plastic sleeve off. Slide scented cartridge into the end of the shroud. Replace filter and return to filter housing. Please refer to page 14 for scented cartridge health warnings.
Operation Without pressing the power button, place your foot on the left side of the AirRam K9 head and pull the handle back. The power button is located on the left hand side of the AirRam K9 head assembly. Press the power button with your foot to turn the AirRam K9 on. To get the best performance on hard floors with deep crevices remove the brush bar as shown on page 12. Insert the supplied brush bar hole plug into the side of the head assembly as shown in the image above.
Battery charging When the state of charge indicator starts to flash one green LED, recharge the battery. The battery can be charged whilst it’s in the AirRam, or when it’s off the product. To remove the battery, squeeze the latch underneath and pull upwards. 4 hours Plug the charger into the mains and connect it to the battery. Switch on at the mains. 9 The battery can be charged from flat in 4 hours. The state of charge indicator will show 4 solid green lights when it is charged.
Emptying the bin Holding onto the AirRam K9 with one hand, pull the bin handle and lift the bin out of the AirRam. Release the latch with the green arrow, to pull open the bin lid. Hold the AirRam’s bin over a rubbish bin and push the green lever towards the lid to empty the dirt. Pull the green lever back towards the bottom of the bin. Close the bin lid and reinsert the bin into the AirRam.
Cleaning the filters - do this once a month or more frequently depending on use. Holding onto the AirRam K9 with one hand, pull the bin handle and lift the bin out of the AirRam. Pull the filter out of the filter housing. Tap the dirt from the filter and tip any dirt from the filter housing. Wash the filter if necessary. Remove the filter from the inner shroud, by twisting and pulling. Tap the inner shroud over a bin to remove any excess dirt. Wash the filter under a tap.
Replacing the filters Slide the filter onto the inner shroud. Slide the filter and inner shroud into the filter housing. Removing and cleaning the brush bar If the brush bar jams during use, the AirRam K9 will stop and the LEDs will appear red. Before checking for a blockage, remove the battery. Rest the AirRam K9 on its side and locate the brush bar button on the right hand side. Press the button inwards and then pull the brush bar out from the bottom of the AirRam.
The brush bar can now be removed, starting at the button end. To remove hair from the brush bar, run an open pair of scissors down the groove to cut the hair, then pull it out. Re-insert the brush bar, starting by the end furthest away from the button. Then line up and push the brush bar into the AirRam K9 until it clicks into place. Replace the battery by sliding it down into the head assembly. It will click into place.
Clearing a jam / fault 10 seconds If the brush bar jams during use, the AirRam K9 will stop and the LEDs will appear red. You will need to remove and clean the brush bar (see page 11). The AirRam K9 will not re-start until the red lights go out. This will take ten seconds. If the problem persists, follow the troubleshooting instructions below. Scented Cartridge Scented cartridge refills: Keep out of the reach of children.
Troubleshooting AirRam K9 is not cleaning well 1. Empty the bin 2. Check bin is correctly fitted 3. Check filter is correctly fitted 4. Clean and/or replace filter 5. Check brush bar fitment AirRam K9 has stopped or won’t work 1. Charge battery 2. Clear debris from brush bar Battery will not charge 1. Check the charger is correctly connected to the battery and mains supply 2. Check wall socket If this doesn’t solve your problem don’t worry, we will help. Go to www.gtech.co.
Product Care Your Gtech AirRam K9 doesn’t need much maintenance: keep the filters clean, keep the brush bar tangle-free and charge the battery. Wipe it with a dry cloth if it gets dirty, including under the bin. AIRRAM K9 TECHNICAL SPECIFICATION Battery model Battery Charging period Battery charger output Weight 103A022 22V 2000mAh Li-Ion 4 hours 27V DC 500mA 3.
WARRANTY – TERMS AND CONDITIONS If your Gtech AirRam K9 breaks, don’t worry, we’re here to help. Go to www.gtech.co.uk or call 01905 345 891 for assistance. The warranty on your AirRam K9 is 2 years from date of purchase. WHAT ISN’T COVERED SUMMARY Gtech does not guarantee the repair or replacement of a product as a result of: • The guarantee becomes effective at the date of purchase (or the date of delivery if this is later).
Notes
Notes
Grey Technology Limited Brindley Road, Warndon, Worcester WR4 9FB CPN01908 email: support@gtech.co.uk telephone: 01905 345891 www.gtech.co.
