Manual

The DrawingBoard VI34 Troubleshooting
Did the software work in the past?
If the software package worked with the tablet in the past, then the
problem lies with the new setup.
Check all the connectors. Is the tablet still plugged into the same port?
If yes, reset the tablet by unplugging and replugging the USB connec-
tor, or, if you are using serial, unplug and replug the power supply.
Restart the software.
Did you reset or power down the computer?
If you are using a serial connection, during reset and power-on, the
computer can send meaningless characters out the serial port and this
can disable the tablet. Reset the tablet again.
Have you installed any new software or hardware? Remove it from
your system and see if the problem goes away.
Did you move any cables?
Have you updated the software or its drivers?
Are you loading another mouse driver, or do you have multiple mouse
drivers?
Did you reinstall the software, perhaps after a problem with your hard
drive? Double check your installation procedure and the driver you
selected.
Reinstall the software from its master diskettes. The program files may
have been corrupted.