User Manual

Host Infor
mation
This module was defined to be used for specific host only. The designated host for this module was:
Company: GT-tronics HK Ltd.
Address: B210, Tonic Industrial Center, 19 Lam Hing Street, Kowloon Bay, Hong Kong
Host Model Name: WiBlue_Breakout_Board_v02
Host brand name: GT-tronics
FCC RF Exposure Requirement
Please be noticed following information and instructions should be placed in the end-user’s
operating manual
The Module has been granted as full modular approval for mobile applications.
A certified modular has the option to use a permanently affixed label, or an electronic label. For a permanently affixed label, the
module must be labeled . The OEM manual must provide clear instructions explaining to the OEM the labeling requirements,
options and OEM user manual instructions that are required.
For a host using this FCC certified modular with a standard fixed label, if (1) the module’s FCC ID is not visible when installed in
the host, or (2) if the host is marketed so that end users do not have straightforward commonly used methods for access to remove
the module so that the FCC ID of the module is visible.
6.
Host product is required to comply with all applicable FCC equipment authorizations regulations, requirements and equipment
functions not associated with the transmitter module portion. Compliance must be demonstrated to regulations for other transmitter
components within the host product; to requirements for unintentional radiators (Part 15B). To ensure compliance with all
non-transmitter functions the host manufacturer is responsible for ensuring compliance with the module(s) installed and fully
operational. If a host was previously authorized as an unintentional radiator under the Declaration of Conformity procedure without
a transmitter certified module and a module is added, the host manufacturer is responsible for ensuring that the after the module is
installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements. Since this may
depends on the details of how the module is integrated with the host, we suggest the host device to recertify part 15B to ensure
complete compliance with FCC requirement: Part 2 Subpart J Equipment Authorization Procedures , KDB784748 D01 v07, and
KDB 997198 about importation of radio frequency devices into the United States.
Page 9 of 10
5.
1. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and
OEM is responsible for meeting SAR requirement of end product.
2. The Module and its antenna must not be co-located or operating in conjunction with any other transmitter or antenna within a host
device. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
3. A label must be affixed to the outside of the end product into which the module is incorporated, with a statement similar to the
following: contains FCC ID:
B4OEC86XFPX
.
4. The module shall be in non-detachable construction protection into the finished products, so that the end-user has to destroy the
module while remove or install it.
1.At least 20cm separation distance between the antenna and the user’s body must be maintained at all times. And must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures.
2.To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the antenna
gain is
-0.30dBi for BLE; 2dBi for WIFI.