User Manual

SUBJECT TO CHANGE WITHOUT PRIOR NOTICE © 2015 - GT-TRONICS REV 05 2016-02-02
Pins Configurations
3
PIN
NAME TYPE FUNCTION
TYPICAL USAGE
1
1 GND Power Ground
2 DIO_0 Digital I/O GPIO with 4mA drive capability GPIO, Sensor control
3 DIO_1 Digital I/O GPIO with 4mA drive capability GPIO, Sensor control
4 DIO_2 Digital I/O GPIO with 8mA drive capability GPIO, Sensor control
5 DIO_3 Digital I/O GPIO with 8mA drive capability GPIO, Sensor control
6 DIO_4 Digital I/O GPIO with 8mA drive capability GPIO, Sensor control
7 GND Power Ground
8 VDD_IO Power 1.8v to 3.8v GPIO Supply Connect to VDD
9 JTAG_TMSC Digital I/O JTAG TMSC Debug port data
10 GND Power Ground
11 JTAG_TCKC Digital I/O JTAG TCKC Debut port clock
12 DIO_5 Digital I/O GPIO with 8mA drive capability GPIO, JTAG_TDO
13 DIO_6 Digital I/O GPIO with 8mA drive capability GPIO, JTAG_TDI
14 VDD Power 1.8v to 3.8v main power supply 3.3v power input
15 RESET_N Digital Input Reset, active-low, no internal pullup Resistor pull up to VDD
16 DIO_7 Digital/Analog I/O GPIO with 4mA drive capability, analog Sensor control, analog
17 GND Power Ground
18 DIO_8 Digital/Analog I/O GPIO with 4mA drive capability, analog GPIO, Sensor control, analog
19 DIO_9 Digital/Analog I/O GPIO with 4mA drive capability, analog GPIO, Sensor control, analog
20 DIO_10 Digital/Analog I/O GPIO with 4mA drive capability, analog GPIO, Sensor control, analog
21 DIO_11 Digital/Analog I/O GPIO with 4mA drive capability, analog GPIO, Sensor control, analog
22 GND Power Ground
23 DIO_12 Digital/Analog I/O GPIO with 4mA drive capability, analog GPIO, Sensor control, analog
24 DIO_13 Digital/Analog I/O GPIO with 4mA drive capability, analog GPIO, Sensor control, analog
25 DIO_14 Digital/Analog I/O GPIO with 4mA drive capability, analog GPIO, Sensor control, analog
Power Ground
26 GND
Note:
1. Typical usage is firmware dependent. Please check with standard firmware application note or your firmware
designer for the actual pin definition.
2.
Pin out for CC2640 5x5 RHB IC package.