User Manual

Host Information

This module was defined to be used for specific host only. The designated host for this module was:

Company: GT-tronics HK Ltd.

Address: B210, Tonic Industrial Center, 19 Lam Hing Street, Kowloon Bay, Hong Kong

Host Model Name: TIEM

Host brand name: N/A

FCC RF Exposure Requirement

At least 5mm separation distance between the antenna and the user’s body must be maintained at all times. And must not transmit

simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures.

To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the antenna

gain is -0.3dBi.

3. A user manual with the end product must clearly indicate the operating requirements and conditions that must be observed to

ensure compliance with current FCC RF exposure guidelines.

Please be noticed following information and instructions should be placed in the end-user’s

operating manual

The Module has been granted as full modular approval for mobile applications. This Module must be installed in the designated

host as specified in this manual.

1. Separate approval is

required for all other operating configurations, including portable configurations with respect to 2.1093 and

different antenna configurations.

2. The Module and its antenna must not be co-located or operating in conjunction with any other transmitter or antenna within a host

device. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

3. A label must be affixed to the outside of the end product into which the module is incorporated, with a statement similar to the

following: contains FCC ID:B4OCC264BPA-S.

4. The module shall be in non-detachable construction protection into the finished products, so that the end-user has to destroy the

module while remove or install it.

A certified modular has the option to use a permanently affixed label, or an electronic label. For a permanently affixed label, the

module must be labeled . The OEM manual must provide clear instructions explaining to the OEM the labeling requirements,

options and OEM user manual instructions that are required.

For a host using this FCC certified modular with a standard fixed label, if (1) the module’s FCC ID is not visible when installed in

the host, or (2) if the host is marketed so that end users do not have straightforward commonly used methods for access to remove

the module so that the FCC ID of the module is visible; The host OEM user manual must also contain clear instructions on how

end users can find and/or access the module and the FCC ID.

Host product is required to comply with all applicable FCC equipment authorizations regulations, requirements and equipment

functions not associated with the transmitter module portion. Compliance must be demonstrated to regulations for other transmitter

components within the host product; to requirements for unintentional radiators (Part 15B). To ensure compliance with all

non-transmitter functions the host manufacturer is responsible for ensuring compliance with the module(s) installed and fully

operational. If a host was previously authorized as an unintentional radiator under the Declaration of Conformity procedure without

a transmitter certified module and a module is added, the host manufacturer is responsible for ensuring that the after the module is

installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements. Since this may

depends on the details of how the module is integrated with the host, we suggest the host device to recertify part 15B to ensure

complete compliance with FCC requirement: Part 2 Subpart J Equipment Authorization Procedures , KDB784748 D01 v07, and

KDB 997198 about importation of radio frequency devices into the United States.