Technical Specifications

Installation: GT-CTB-40A | 5200LM/40W LED High Lumen E26 Bulb
This product is guaranteed against failure due to factory defects in
materials or workmanship for one (1) year from the date of purchase.
This warranty is non-transferable and applies only to the original owner.
Proof of purchase required for repair or replacement. This warranty does
not cover normal wear of parts or damage resulting from any misuse of
the product. Misuse of the product includes but is not limited to: using in
extreme weather conditions, opening the housing of the product, or
attempted remodel/alterations made to product.
- Do not look directly at the LED lights for any length of time.
- Do not shine the light directly into other people’s eyes.
EYES
1. Turn power OFF.
2. Use a soft cloth and a mild, non-abrasive glass cleaner.
3. Lightly wipe and clean the fixture.
DO NOT use solvents.
DO NOT use cleaners containing abrasive ingredients.
NEVER spray cleaning liquid directly onto the LEDs, fixture, or wiring.
TROUBLESHOOTING GUIDE:
CLEANING INSTRUCTIONS:
Fixture does
not turn on.
Problem
Probable Cause
Solution
Circuit breaker trips
or fuse blows when
light is turned on.
Bad connection.
Faulty switch.
Power is off.
Discontinue use
immediately.
Check wiring connections.
Test switch or replace it.
Verify power supply is on.
Call customer service at 1-800-865-6799
Call an electrician.