Datasheet

36
OR series
The OR series antenna outlets can be used in
distribution networks up to 862 MHz. They
are designed for connection of one radio
receiver and one TV. The designs as through-
type outlet with staged output attenuations
and stub cable outlet ensure economical
planning of distribution networks with trunk
or star structure. The return channel compati-
bility and the high return fl ow attenuation
satisfi es the requirements for interactive net-
works for data transmission.
The antenna outlets are distinguished by a
stable cast housing and can be installed sur-
face-mounted on the wall using the ORF 03
frame. The inner conductor is fastened with a
contact screw and the outer conductor with a
clamp. All components satisfy the Standard
DIN EN 50083 – 2/-4. The following compo-
nents are available as accessories for the OR
series antenna outlets: Terminal resistor
ORT 01, surface mount frame ORF 03 and
cover plate ORC 02.
Wideband Stub
cable outlet
OR 02
Connectors
DIN IEC female socket for Radio
DIN IEC male socket for TV
Frequency range 5 – 862 MHz
Tap-loss TV
5 - 862 MHz
2.2 dB
Tap-loss Radio
87.5 – 139 MHz
5.5 dB
Return-loss
5 – 65 MHz
65 – 862 MHz
> 20 dB
> 15 dB
Wideband sockets for trunk lines OR 20 OR 15 OR 11 OR 09
Connectors
DIN IEC female
socket for Radio,
DIN IEC male
socket for TV
DIN IEC female
socket for Radio,
DIN IEC male
socket for TV
DIN IEC female
socket for Radio,
DIN IEC male
socket for TV
DIN IEC female
socket for Radio,
DIN IEC male
socket for TV
Frequency range 5 – 862 MHz 5 – 862 MHz 5 – 862 MHz 5 – 862 MHz
Through-loss
5 – 470 MHz
470 – 862 MHz
0.5 dB
0.8 dB
0.8 dB
1.0 dB
1.0 dB
1.3 dB
1.7 dB
2.1 dB
Decoupling-loss TV 5 – 862 MHz 20.0 dB 15.0 dB 11.5 dB 9.5 dB
Decoupling-loss Radio 5 – 139 MHz 22.0 dB 18.0 dB 15.0 dB 12.0 dB
Directional-loss > 38 dB > 33 dB > 33 dB > 35 dB
Return-loss
5 – 65 MHz
65 – 862 MHz
> 20 dB
> 15 dB
> 20 dB
> 15 dB
> 20 dB
> 15 dB
> 20 dB
> 15 dB