Users Manual

K. The IntelliPad is not working properly

Refer to Appendix B

USB IntelliPad

L. The drawer makes an “uh-uh” sound when I authenticate

1. Ensure that you are logged in to IntelliSys

2. If you are logged in, you are not authorized to open the drawer.

a. If you have an active pick light on your workstation, check that you are the user who

is logged into that workstation. If not, cancel the pull and log in to restart the pick

operation.

b. The person who verifies contents of a basket is authorized to shelve it

M. How do I do a Partial Fill?

1. For partial fills, either:

a. Change the quantity in the pharmacy management system and generate a new Rx

label, or

b. Perform an Inventory Adjustment

1. Navigate to Inventory > Inventory

2. Select Inventory Type Custom

3. Select Filter (e.g. NDC). Enter info (e.g. NDC#), press Add, press Search

4. Select SmartBasket(s) to retrieve, press Pull

Note: Second person logs in if participating in audit of the Back-count

5. Press Pull and follow pick light to retrieve SmartBasket(s)

6. Place SmartBasket on IntelliPad

Note: Press Cancel to cancel the transfer

7. Press Adjust Inventory