User's Manual

Appendix M: EDGE GSF LFID ANTENNA - End-of-Life Disassembly
Item description Notes
Quantity of items
included in the
product
Location
Components, parts and
materials containing
radioactive substances
none
Components, parts and
materials containing
chlorofluorocarbons
(CFC), hydrochlorofluoro-
carbons (HCFC), hydro-
fluorocarbons (HFC),
hydrocarbons (HC)
none
1
All plastics used in this product are RoHS compliant and do not contain PBBs or PBDEs
Product Disassembly Process
The next session lists the basic steps that you should follow to remove components for recycling and
materials requiring selective treatment.
Note: For the next steps, EDGE GSF LFID ANTENNA is unplugged and unfasten from the GSF stall.
Step
Process
Remove and
recycle External
Electrical cables
and internal Electri-
cal cables
1. Unscrew and open the EDGE GSF LFID Antenna cover (item 8).
2. Cut and remove the wires from the EDGE GSF LFID Antenna enclosure.
3. Recycle the cable (item 4).
4. Cut and remove the antenna coil (item 3) from the EDGE GSF LFID Antenna enclosure.
Remove and
recycle Printed Cir-
cuit Assembly
1. Unscrew and open the EDGE GSF LFID Antenna cover (item 8).
2. Locate this PCB:
• PCB-456 (item 5)
3. Unscrew with a Philips screwdriver #1 and remove the screws (item 6) from the PCB.
4. Remove the PCBs from the EDGE GSF LFID Antenna.
Recycle plastic
1. Unscrew and open the EDGE GSF LFID Antenna cover (item 8).
2. Remove the Gasket (item 7).
3. Keep only plastic parts.
4. Recycle the plastic enclosure and the plastic parts.
Recycle metal parts
1. Recycle metal parts of the EDGE GSF LFID Antenna.
50
890-00682 EDGE GSF LFID Antenna